Fittings, Mounting Chucks, Probe Accessories

3 Northern Boulevard, Amherst, NH 03031-2329
TEL: 603-672-0909 · FAX: 603-672-0037
E-mail: unitedsensor@unitedsensorcorp.com

FITTINGS, MOUNTING CHUCKS & ACCESSORIES

Stainless Steel Connectors:

Ordering Part No.	Description
USC-8261-1	Universal Tee Connector Used for the connection of three separate lines to allow measuring of differential pressures directly on a single manometer rather than measuring pressures separately and then subtracting. Will accept take-off tubing from 1/16"ID to 1/4"ID.
USC-8261-2	Universal Straight Connector Used for coupling plastic and rubber tubing of the same or different inside diameters. Will accept take-off tubing from 1/6"ID to 1/4"ID.

Pressure Dividing Choke:

Ordering Part No.	Description
USC-8261-3	For use with static pressure probes. P2 & P3 are usually balancing pressures, so divider provides high choking resistance between ends. Average pressure is provided at outlet to be read my manometer as indicated static pressure. Will accept take-off tubing of 1/8"ID.

Mounting Chucks:

Mounting Chucks Ordering Part No.	Inside Diameter	Thread Size	Material
USC-S8213-80	0.062"	1/8NPT	Stainless Steel
USC-S8213-81	0.093"	1/8NPT
USC-S8213-82	0.125"	1/8NPT
USC-S8213-83	0.156"	1/8NPT
USC-S8213-84	0.187"	1/8NPT
USC-S8213-94	0.250"	1/4NPT
USC-S8213-95	0.312"	1/4NPT
USC-S8213-110	0.375"	3/8NPT
USC-S8213-124	0.500"	1/2NPT

Plastic Tubing (color coded):

Ordering Part No.	I.D. Size	Description
USC-SA-82119-2	1/16	Plastic semi-transparent pressure tubing is resistant to most solvents, acids, and alkalis. Max operating temperature 120°F. Max. Pressure 150PSI for short periods depending on temperature. No hose clamp needed for pressure tight seal to plain metal tubing. Minimum orders 10 feet.
USC-SA-82119-1	1/8
USC-SA-82119-7	3/16
USC-SA-82119-8	1/4

AVAILABLE PROBES

Spherical Probes also Available

United Sensor Corporation • 3 Northern Boulevard, Amherst, NH 03031-2329 • TEL: 603-672-0909 • Fax: 603-672-0037